Lab Syringe Pump

Product Detail

Product Feature
? Small compact size for easy installation into other instruments
? PTFE plunger, borosilicate cylinder, anti-corrosion, anti high temperature, suitable for different medium
? Equipped with NMB stepper motor, KSS ball screw, high stability, free maintenance
? Optional communication RS232/RS485/CAN integrated for different needs on different devices
? Widely used in analytical instruments such as environmental protection, medical analysis, non-standard high precision sampling device etc.
? RUNZE Patent product





Technical Parameter

Accuracy	=1%@100% stroke
Repeat accuracy	3‰ - 7‰
Pressure	0-1.0Mpa (air)	0-1.2Mpa (water)
Service life	3 million times no leakage (media: water)
Detection	Photosensor check original piston position for accurate location
Rated stroke (control steps)	5ml	10ml	20ml
	30mm (12000 steps)	24.08mm (9632 steps)	24.88 (9952 steps)
Linear speed	0.017mm/s – 5mm/s
Time range (rated stroke)	6s – 1765s	4.8s – 1416s	5s – 1464s
Accuracy resolution	0.0025mm/0.4154µL	0.0025mm/1.0381µL	0.0025mm/2.0096µL
Actuator	Ball screw (lead 1mm)
Max piston drive	= 100N
Sub piston drive	= 45 N
Syringe ID	5ml	10ml	20ml
	14.55mm	23mm	32mm
Fluid path	Borosilicate cylinder, PTFE piston
Max pressure	Positive air pressure 0-1.0Mpa / Negative air pressure 0-0.05Mpa
Connector	1/4-28UNF female
Communication	RS232/RS485/CAN
Baud rate	9600dps, 19200dps, 38400dps, 57600dps, 115200dps
Device add. & Parameter setting	Serial Pont
Dimension (L*W*H)	42*42*210mm
Power supply	DC24V/1.5A
Working temperature	5 – 55?
Working humidity	< 80%
Weight	0.72kg




Product Function

Address setup	Serial port
Baud rate setup	Different baud rates under RS232/RS485/CAN available
CAN target add setup	Superior device setup support
Speed setup	Serial setup 1-250rpm/min (air and liquid different)
Subdivision setup	Serial setup: subdivision must be 256 when speed as 1rpm/min
Reset internal data	Factory setting
Inquiry parameter	Device add, speed, subdivision, baud rate
Inquiry version	Current version
Motor direction	CW, CCW
Reset	Return piston to origin
Strong stop	Strong stop the running motor
Motor status inquiry	Inspect current motor status
Power memory	When motor suddenly stops, current position can be enquiry by display the distance to origin




Motor Parameter

Name	0.9°step motor	1.8°step motor
Max power	9.2W	9.2W
Step angle	0.9°	1.8°
Phase	2	2
Phase volt	4.6V	4.2V
Phase current	1.0A	1.1A
Resistance	4.6O±0.48	3.8O±0.38
Inductance	18.6mH REF	5.2mH REF
Insulation	100m O MIN	100m O MIN
Max Temp.	80? MAX	80? MAX
Explosion-Proof level	B	B




Motor Wireline

Definition	0.9°step motor line	1.8°step motor line
A	Orange	Orange
A-	Blue	Blue
B	Red	Red
B-	yellow	yellow




Driver Port Direction



Port Name	Description	Port Name	Description
+	DC24V positive	A-	step motor A-
-	DC24V negative	B+	step motor B+
TX	RS232 TX	B-	step motor B-
RX	RS232 RX	O1	IO1
GND	RS232 Land	O2	IO2
H	CAN - H	O3	IO3
L	CAN - L	V1	V1
A	RS485 - A	V2	V2
B	RS485 - B	V3	V3
A+	step motor A+	GND	earth wire




Working Flow






Packing & Shipping